Dauntless Aviation
 
FAA Written Test Prep
Checkride Oral Exam Prep
Pilot eLogbook System
Aircraft Systems Reviews
EASA Theory Exam Prep
China ATPL Theory Prep
UK PPL/IMC Theory Prep
Transport Canada Theory Exam Prep
Aircraft Recognition Tutor
SimPlates IFR Plates
FAR/AIM Reference
All Software and Apps
Aviation Freebies
Free Aircraft Checklists
MetalWings Diecast
 
Products by Platform
 
Support
Knowledgebase / FAQ
Contact
Employment
SBD Dauntless
 
Bulk Purchases
Site/Lab Licensing
Affiliate Program
 
Home

Aviation Glossary :: Verb  Aviation Glossary :: Verb FAA Written Test Preparation
Aviation Glossary Welcome to the Dauntless Aviation Glossary!

At Dauntless, our editorial staff maintains the web's largest unified glossary of aviation terms. This glossary is built from a combination of official, quasi-official, and proprietary sources (including original material that we develop oursselves). Uniquely, we often provide multiple definitions of a given term so that you can find that which best applies to you. In order to maximize your learning efficiency, this glossary (and similar ones for our international users) is incresingly fully integrated into our aviation learning apps, including our FAA written test prep and FAA practical test prep software and apps. If you like this glossary, you'll love them with their polished learning environments and world's best and clearest content (please do give them a try.).

Verb
Verb
To smooth the surface of metal that has been damaged by a deep scratch or gouge. The metal piled up at the edge of the damage is pushed back into the damage with a smooth, hard steel burnishing tool.
source: FAA Aviation Maintenance Technician Airframe Handbook (FAA-H-8083-31)
To lock the gimbals of a gyroscopic instrument so it will not be damaged by abrupt flight maneuvers or rough handling.
source: FAA Aviation Maintenance Technician Airframe Handbook (FAA-H-8083-31)
To initiate an action by depressing a key or a button.
source: FAA Aviation Maintenance Technician Airframe Handbook (FAA-H-8083-31)
To square up the Pratt truss used in an airplane wing. Trammel points are set on the trammel bar so they measure the distance between the center of the front spar, at the inboard compression strut, and at the center of the rear spar at the next compression strut outboard. The drag and antidrug wires are adjusted until the distance between the center of the rear spar at the inboard compression strut and the center of the front spar at the next outboard compression strut is exactly the same as that between the fist points measured.
source: FAA Aviation Maintenance Technician Airframe Handbook (FAA-H-8083-31)

Ace Any FAA Written Test!
Actual FAA Questions / Free Lifetime Updates
The best explanations in the business
Fast, efficient study.
Pass Your Checkride With Confidence!
FAA Practical Test prep that reflects actual checkrides.
Any checkride: Airplane, Helicopter, Glider, etc.
Written and maintained by actual pilot examiners and master CFIs.
The World's Most Trusted eLogbook
Be Organized, Current, Professional, and Safe.
Highly customizable - for student pilots through pros.
Free Transition Service for users of other eLogs.
Our sincere thanks to pilots such as yourself who support AskACFI while helping themselves by using the awesome PC, Mac, iPhone/iPad, and Android aviation apps of our sponsors.

Disclaimer: While this glossary in most cases is likely to be highly accurate and useful, sometimes, for any number of editorial, transcription, technical, and other reasons, it might not be. Additionally, as somtimes you may have found yourself brought to this page through an automated term matching system, you may find definitions here that do not match the cotext or application in which you saw the original term. Please use your good judgement when using this resource.


© 2024 Dauntless Aviation • 4950C York Road 110, Buckingham, PA, 18912, USA • Contact UsPrivacy Policy