|
Welcome to the Dauntless Aviation Glossary!
At Dauntless, our editorial staff maintains the web's largest unified glossary of aviation terms. This glossary is built from a combination of official, quasi-official,
and proprietary sources (including original material that we develop oursselves). Uniquely, we often provide multiple definitions of a given term so that you can find that which best applies
to you. In order to maximize your learning efficiency, this glossary (and similar ones for our international users) is incresingly fully integrated into our aviation learning apps, including
our FAA written test prep and FAA practical test prep software and apps. If you like this glossary,
you'll love them with their polished learning environments and world's best and clearest content (please do give them a try.).
|
Annual Inspection
Annual Inspection | | A complete inspection of an aircraft and engine, required by the Code of Federal Regulations, to be accomplished every 12 calendar months on all certificated aircraft. Only an A&P technician holding an Inspection Authorization can conduct an annual inspection. | source: FAA Airplane Flying Handbook (FAA-H-8083-3A) |
| | An inspection required by the FAA once every 12 calendar months if other suitable inspections do not occur within that time frame. An A&P technician with inspection authorization must perform this inspection. | source: FAA Aviation Maintenance Technician General Handbook (FAA-H-8083-30) |
| | A complete inspection of the air-frame and powerplant required for FAA-certificated aircraft operating under 14 CFR part 91 General Operating and Flight Rules, and not on one of the authorized special inspection programs. An annual inspection must be conducted every 12 calendar months, and it must be conducted by an aviation maintenance technician who holds an Airframe and Powerplant rating and an Inspection Authorization. The scope of an annual inspection is the same as that of a 100-hour inspection. | source: FAA Aviation Maintenance Technician Powerplant Handbook (FAA-H-8083-32) |
| | A maintenance term directed by 14 CFR part 91, section 91.409, which states that “no person may operate an aircraft unless, within the preceding 12 calendar months, it has had—(1) an annual inspection…and has been approved for return to service…” | source: FAA Balloon Flying Handbook (FAA-H-8083-11) |
| | A complete inspection of an aircraft and engine, required by the Code of Federal Regulations, to be accomplished every 12 calendar months on all certificated aircraft. Only an Airframe and Powerplant technician holding an Inspection Authorization can conduct an annual inspection. | source: FAA Weight Shift Control Handbook (FAA-H-8083-5) |
| |
|
Ace Any FAA Written Test!
|
Actual FAA Questions / Free Lifetime Updates |
|
The best explanations in the business |
|
Fast, efficient study. |
|
Pass Your Checkride With Confidence!
|
FAA Practical Test prep that reflects actual checkrides. |
|
Any checkride: Airplane, Helicopter, Glider, etc. |
|
Written and maintained by actual pilot examiners and master CFIs. |
|
The World's Most Trusted eLogbook
|
Be Organized, Current, Professional, and Safe. |
|
Highly customizable - for student pilots through pros. |
|
Free Transition Service for users of other eLogs. |
|
Disclaimer: While this glossary in most cases is likely to be highly accurate and useful, sometimes, for any number of editorial, transcription, technical, and other reasons, it might not be.
Additionally, as somtimes you may have found yourself brought to this page through an automated term matching system, you may find definitions here that do not match the cotext or application in which
you saw the original term. Please use your good judgement when using this resource.
|
© 2024 Dauntless Aviation • 4950C York Road 110, Buckingham, PA, 18912, USA •
Contact Us •
Privacy Policy / Terms / Conditions
|
|